72
en | Using your MIC Camera
MIC IP fusion 9000i
2019-11 | 1.2 |
Operation Manual
Bosch Security Systems
11.5
Uploading a User Logo
Customers have the option to upload custom logos that display on the web browser of the
device.
All user logo images must comply with the following requirements:
–
The file format must be a bitmap (.bmp).
–
Height and width must not exceed 128 pixels.
–
Color depth must be 8 bit (256 color bitmap).
Upload the Logo File
1.
If necessary, open the browser. Click
Configuration
.
2.
Click
General
. Select
Display Stamping
.
3.
Select the field
Camera name stamping
. Select the position of the logo:
Bottom
,
Top
, or
Custom
.
Note:
If you select
Custom
, then additional fields (
Position (XY)
) appear where you can
specify the exact position of the logo. In the fields
Position (XY)
, enter the values for the
desired position (0 - 255).
4.
Click
Logo Browse
to open a file-search dialog. Select the image file (.bmp).
5.
Click
Upload
to transfer the file to the camera.
The message “Upload successful” should appear.
The new logo, if applicable, replaces the previous one.
6.
Select the field
Logo position
. Select the position of the logo on either side of the camera
name:
Left
,
Right
, or
Logo only
. (The default value is
Off
.)
7.
Click Set to save.
Set Logo Transparency (Optional)
1.
Click the check box
Transparent background
.
2.
Click Set to save.
3.
Note that the color of the entire first line of the logo is the color that will be changed to
transparent in the remainder of the logo. For example, if the first line is white, then all of
the identical white colors of the logo image will become transparent.
Change the Camera Title
1.
Click
General
. Select
Identification
.
2.
Delete all of the text in the field
Camera name
.
3.
Rename the camera if desired.
4.
Click Set to save.
11.6
Two-line and Three-line Camera Titles
There are two options to display camera titles, but these should not be used together. Choose
one of the following modes.
–
Mode 1: Azimuth/Elevation/Compass/Zoom Options
–
Mode 2: Camera Title combined with Compass
Mode 1: Azimuth/Elevation/Compass/Zoom Options
Select one of the following options:
–
Display Azimuth/Elevation and ZOOM value (Optical/Digital) at the bottom of the screen.
Use the command AUX ON-95-ENTER.
–
Display Azimuth/Elevation/Compass at the bottom of the screen. Use the command AUX
ON-96-ENTER.
Mode 2: Camera Title combined with Compass
Select one of the following options. Users can toggle between the two options.
–
Display two (2) lines of text at the top of the video. Use the command AUX ON-75-ENTER.
