40
en | Recording
MIC IP fusion 9000i
2019-11 | 1.2 |
Operation Manual
Bosch Security Systems
!
Caution!
Without metadata, it is not possible to include video content analysis in recordings.
Standard recording
Select the mode for standard recordings:
–
Continuous
: the recording proceeds continuously. If the maximum recording capacity is
reached, older recordings are overwritten automatically.
–
Pre-alarm
: recording takes place in the pre-alarm time, during the alarm and during the
post-alarm time only.
–
Off
: no automatic recording takes place.
Stream
Select the stream to be used for standard recordings:
–
Stream 1
–
Stream 2
–
I-frames only
Alarm recording
Select a period for the
Pre-alarm time
from the list box.
Select a period for the
Post-alarm time
from the list box.
Alarm stream
Select the stream to be used for alarm recordings:
–
Stream 1
–
Stream 2
–
I-frames only
Check the
encoding interval and bit rates from profile:
box and select an encoder profile to
set the associated encoding interval for alarm recording.
Check the
Export to account
box to send standard H.264 or H.265 files to the target whose
address is displayed.
If the target has not yet been defined, click
Configure accounts
to jump to the
Accounts
page
where the server information can be entered.
Alarm triggers *
Select the alarm type that is to trigger an alarm recording:
–
Alarm input
–
Analysis alarm
–
Video loss
Select the
Virtual alarm
sensors that are to trigger a recording, via RCP+ commands or alarm
scripts, for example.
6.4
Maximum Retention Time
Recordings are overwritten when the retention time entered here has expired.
4
Enter the required retention time in days for each recording track.
Make sure that the retention time does not exceed the available recording capacity.
6.5
Recording Scheduler
The recording scheduler allows you to link the created recording profiles with the days and
times at which the camera's images are to be recorded in the event of an alarm.
