background image

en 

Installation instructions

16

WARNING ‒ Risk of poisoning!

Risk of poisoning from flue gases being drawn back in.
Room-air-dependent heat-producing appliances (e.g.
gas, oil, wood or coal-operated heaters, continuous
flow heaters or water heaters) obtain combustion air
from the room in which they are installed and dis-
charge the exhaust gases into the open through an ex-
haust gas system (e.g. a chimney). With the extractor
hood switched on, air is extracted from the kitchen and
the adjacent rooms. Without an adequate supply of air,
the air pressure falls below atmospheric pressure.
Toxic gases from the flue or the extraction shaft are
sucked back into the living space.

Always ensure adequate fresh air in the room if the
appliance is being operated in exhaust air mode at
the same time as a room air-dependent heat-produ-
cing appliance is being operated.

It is only possible to safely operate the appliance if
the pressure in the room in which the heating appli-
ance is installed does not drop more than
4 Pa (0.04 mbar) below atmospheric pressure. This
can be achieved whenever the air needed for com-
bustion is able to enter through openings that can-
not be sealed, for example in doors, windows, in
conjunction with incoming/exhaust air wall boxes or
by other technical means. An incoming/exhaust air
wall box alone does not ensure compliance with the
limit.

In any case, consult your responsible chimney
sweep. They are able to assess the house's entire
ventilation setup and will suggest the suitable ventil-
ation measures to you.

Unrestricted operation is possible if the appliance is
operated exclusively in air recirculation mode.

WARNING ‒ Risk of suffocation!

Children may put packaging material over their heads
or wrap themselves up in it and suffocate.

Keep packaging material away from children.

Do not let children play with packaging material.

WARNING ‒ Risk of fire!

¡

Grease deposits in the grease filter may catch fire.

The specified safety clearances must be com-
plied with in order to prevent a build-up of heat.

Observe the specifications for your cooking ap-
pliance. If gas and electric hobs are being oper-
ated together, the largest specified clearance ap-
plies.

¡

Grease deposits in the grease filter may catch fire.

Never work with naked flames close to the appli-
ance (e.g. flambéing).

Do not install the appliance near a heat-produ-
cing appliance for solid fuel (e.g. wood or coal)
unless a closed, non-removable cover is avail-
able. There must be no flying sparks.

WARNING ‒ Risk of injury!

¡

Components inside the appliance may have sharp
edges.

Wear protective gloves.

¡

The appliance may fall down if it has not been prop-
erly fastened in place.

All fastening components must be fixed firmly
and securely in place.

¡

The appliance is heavy.

To move the appliance, two people are required.

Use only suitable tools and equipment.

¡

The appliance is heavy.

The appliance must not be fitted directly onto
plasterboard or similar lightweight materials.

To ensure correct installation, you must use a
material which is sufficiently stable and suitable
for both the structural conditions and the weight
of the appliance.

¡

Changes to the electrical or mechanical assembly
are dangerous and may lead to malfunctions.

Do not make any changes to the electrical or
mechanical assembly.

¡

Risk of falling when working on the appliance

Use a stable stepladder.

Do not lean over the hob.

Do not step on the hob or the work surface.

¡

The filter cover may swing out.

Open the filter cover slowly.

Take hold of the filter cover after opening until it
no longer swings out.

Close the filter cover slowly.

¡

Risk of injury when opening and closing the hinges.

Keep your hands away from the hinges.

WARNING ‒ Risk of electric shock!

¡

Sharp-edged components inside the appliance may
damage the connecting cable.

Do not kink or trap the connecting cable.

¡

If the appliance or the power cord is damaged, this
is dangerous.

Never operate a damaged appliance.

Never pull on the power cord to unplug the appli-
ance. Always unplug the appliance at the mains.

If the appliance or the power cord is damaged,
immediately unplug the power cord or switch off
the fuse in the fuse box.

Call Customer Service. → 

Page 14

Repairs to the appliance should only be carried
out by trained specialist staff.

All manuals and user guides at all-guides.com

Summary of Contents for LR 7CBS2 Series

























Reviews: