Bosch Kiox, Original Operating Instructions, Page: 22 / 148

English – 6 ​
1 270 020 XBK | (12.03.2019) Bosch eBike Systems
Displays and settings of the on-
board computer
Please note: All screenshots showing the display and text
on the following pages are from the approved software ver-
sion. The display and/or text may change slightly following a
software update.
Operating logic
You can use the < (10) and > (8) buttons to switch between
the different riding value information pages (even while rid-
ing). This way, you can keep both hands on the handlebars
while cycling.
You can use the
+ (12) and – (11) buttons to increase or de-
crease the assistance level. If you are in a list (e.g. the <Set-
tings> menu), you can use these buttons to scroll up or
down in the list.
The
<Settings> that can be accessed via the status page
cannot be changed while riding.
You can use the select button (9) to perform the following
functions:
– You can access the quick menu while riding.
– You can access the settings menu from the status page
while stationary.
– You can confirm values and acknowledge informative
hints.
– You can exit a dialogue.
If the on-board computer is removed from its holder and not
switched off, it will display information regarding the last
journey, as well as status information, on a loop.
If no button is pressed after the on-board computer is re-
moved from the holder, it will switch itself off after one
minute.
Order of pages
Provided the on-board computer is fitted to the holder, you
can view the following displays one after the other:
1.
Start page
2.
Time and range
3.
Distance and journey time
4.
Power and cadence
5.
Average and maximum speed
6.
Distance, range, power and heart rate
7.
Heart rate
8.
Calories burnt
and
total distance
9.
Status page
Start page
When you insert the on-board computer into the holder
while it is switched on, it will display the start page.
24,
3
c
d
e
f
h
i
j
a
b
g
k
a Time/speed indicator
b Assistance level indicator
c Lighting indicator
d Battery charge indicator of the eBike battery
e Unit of speed indicator
A)
f Speed
g Navigation bar
h Motor output
i Your performance
j Average speed
k Performance evaluation
A) Can be changed via the <Settings> status page.
The a and d indicators form the status bar and are shown on
every page. If the speed is already being displayed on the
screen itself, the
a indicator will change to the current time
in hours and minutes. The status bar displays:
–
Speed/time: The current speed in km/h or mph or the
current time
– Assistance level: Indicates the current level of assistance
using a colour code
– Light: A symbol that indicates whether the light is on
– eBike battery state of charge: Indicates the current
state of charge as a percentage
The performance evaluation k graphically displays your cur-
rent speed (white bar) in comparison to your average
speed
j . The graphic shows you whether your current speed
is faster or slower than your average speed (left of the black
line = lower than average value; right of the black line =
higher than average value).
The navigation bar
g indicates which page you are on. Your
current page is highlighted. You can use the (10) < and
(8) > buttons to go to different pages.
From the initial start page, you can access the status page
via the
< (10) button.