KBE and KBN Series
Installation | en
23
Bosch Security Systems, Inc.
Instruction Manual
F01U078718 | 2.0 | 2008.01
Figure 4.7
Power Wire Connection
5.
Pass the supplied orange string through the mounting foot
of the camera housing and the furnished mount. See
Figure 4.2
. A fitting may be used in the mounting foot if
desired.
6.
Attach the end of the string to the Cat5/Cat6 cable and
pull it through the mount and the unused hole in the
mounting foot of the camera housing. See
Figure 4.3
.
7.
Connect the Cat5 / Cat6 cable to the network connector
on the back of the camera. See
Figure 4.4
.
8.
If an unterminated Cat5/Cat6 cable is being used, a fitting
may be used in the mounting foot of the camera housing.
The network cable should be terminated with an RJ-45
connector in accordance with the connector
manufacturer’s recommendations.
9.
Seal the hole in the mounting foot of the camera housing
with RTV or an equivalent seal. See
Figure 4.5
. If a fitting
was used in the mounting foot, apply the seal around the
network cable before tightening the fitting, to prevent
slippage. A split rubber sleeve (not supplied) may be used
for this purpose.
Reference Description
1
Power terminal
Summary of Contents for KBE-335V28-20
Page 1: ...KBE and KBN Series Prepackaged Cameras en Instruction Manual ...
Page 2: ......
Page 35: ......
