16
en | Installation
KBE and KBN Series
F01U078718 | 2.0 | 2008.01
Instruction Manual
Bosch Security Systems, Inc.
4
Installation
4.1
Operating Voltage
All Recommended operating voltage is 24 VAC, 60 Hz.
4.2
Preparing the Unit
Remove the mount and the housing assembly from the carton.
4.3
Preparing the Mount
Prepare and secure the mount to the wall or mounting surface
as described in the LTC 9215/00 Installation Manual included in
the Instruction Booklet Packet.
4.4
Housing
Feed the cabling from the housing foot through the mount.
Attach the housing to the mount using the two (2) 1/4-20
screws and washers provided in the hardware kit. For
additional information, see the LTC 9215/00 Mount Installation
Manual and UHO-HBGS-10 Series Housing Installation Manual.
4.5
Line Power and Video Signal Connection
The external video coax cable is equipped with a female BNC
connector for transmission of video. Route and connect video
cable to the BNC connector. The external power cable is
provided to allow for necessary stripping/preparation by the
installer. For additional information, see the Installation
Manuals included in the Instruction Booklet Packet.
!
WARNING!
This installation should be made by a qualified
service person and conform to all local codes.
Color
Connection
Green
Ground
White
24 V
Black
24 V
Summary of Contents for KBE-335V28-20
Page 1: ...KBE and KBN Series Prepackaged Cameras en Instruction Manual ...
Page 2: ......
Page 35: ......
