Bosch INTEGRUS Installation And Operating Manual Download Page 36 | Manualshive

Page: 36 / 60

background image

36

| en

INTEGRUS | Digital Infra-red Language Distribution System

BOSCH Security Systems B.V.| February 2003

2.5 Configuration

and

operation

The next sections give descriptions of the possible configuration options. Each description is followed by the relevant menu
items with detailed information per menu option.
The default values (see section ‘Reset all options to factory defaults’) are indicated by an asterix (*) when applicable.

2.5.1 Start-up

When the transmitter is switched on, the display shows the Transmitter Status screen, which is the first item of the Main menu.
The display also goes to this screen after 5 minutes of inactivity.

2.5.2 Main

menu

The main menu contains the screens to view the transmitter status and the radiator fault status. It also contains the entry points
to the Monitoring, Enquiry and Setup sub-menus.

Menu Item

Description

Transmitter Status

Shows the transmitter status (see section 2.5.3)

1 Fault Status

Shows the radiator fault status (see section 2.5.4)

2 Monitoring ...

Go to the 'Monitoring' sub-menu (see section 2.5.5)

3 Enquiry ...

Go to the 'Enquiry' sub-menu (see section 2.5.6)

4 Setup …

Go to the 'Setup' sub-menu (see sections 2.5.7 and higher)

2.5.3 View

transmitter

status

The first screen of the Main menu gives information about the present status of the transmitter. The screens shows the name of
the transmitter (1st line) and the present transmission mode (2nd line). See examples below. See section 2.5.7 to change the

transmission mode.

Transmitter

10 Channels DCN

Transmitter

Aux to All

Transmiter

Standby

Transmitter is transmitting 10 channels

from DCN.

Transmitter is transmitting the Aux inputs

on all channels.

Transmitter is in Standby mode (not

transmitting)

Menu Items

Options (read only)

Description

Transmitter Status

Name

The first line shows the user defined name of the transmitter (see

section 2.5.15).

Mode:

The second line shows the actual transmission mode:

-

nn Channels

Audio signals are distributed on nn channels.

-

Aux to All

The signal on the Aux. inputs is distributed on all channels.

-

nn Ch. Test

The test signals are distributed on nn channels.

-

Slave

The transmitter operates in slave-mode: the radiator signal on the
slave input is looped-through to all radiator outputs.

-

Standby

The transmitter is in stand by mode.

-

Emergency Call

An emergency signal from the Aux. inputs is distributed to all
channels.

DCN

The text 'DCN' is shown at the right side of the second line when a
DCN system is connected to the transmitter.

«
...
34
35
36
37
38
...
»

Summary of Contents for INTEGRUS





























































Reviews:

No comments

Related manuals for INTEGRUS

Brand: Nakamichi Pages: 8

Brand: Coby Pages: 3

SoundPoint Pro SE-220

Brand: Polycom Pages: 2

RM-208 CB.13.01

Brand: EasyLine Pages: 16

Brand: auna multimedia Pages: 9

Brand: Powerdist Pages: 7

Brand: ELBE Pages: 19

Brand: RCA Pages: 2

Brand: RCA Pages: 16

Brand: Sharp Pages: 68

Brand: Sharp Pages: 112

Brand: Yamaha Pages: 4

TSX 130 - CD / MP3 Clock Radio

Brand: Yamaha Pages: 25

Brand: Yamaha Pages: 32

Brand: Yamaha Pages: 32

Brand: Yamaha Pages: 40

Brand: Yamaha Pages: 47

Brand: Yamaha Pages: 41

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands