9
* Depending on model
Before using your appliance for the first
time
Fig.
1
Push the handle onto the flexible hose and lock it in
place.
Initial use
Fig.
2
a)
Push the flexible hose adapter into the air intake
opening in the lid until it locks in place.
b)
To remove the flexible hose, press the two catches
together and pull out the hose.
Fig.
3
Push the handle into the telescopic tube until it
locks into place.
To release the connection, press the locking collar
and pull out the telescopic tube.
Fig.
4
Push the telescopic tube into the connecting piece
of the floor nozzle until it locks in place.
To release the connection, press the locking collar
and pull out the telescopic tube.
Fig.
5
Unlock the telescopic tube by moving the sliding
switch in the direction of the arrow, and adjust to
the desired length.
Fig.
6
a)
Place the accessories holder in the required positi-
on on the telescopic tube.
b)
Use some pressure to insert the upholstery nozzle
and the crevice nozzle into the accessories holder
from above or below.
Fig.
7
Holding the power cord by the plug, pull it out to the
required length and insert the plug into the mains
socket.
!
If using the appliance for longer than 30 minutes,
pull out the power cord completely.
>
=
Risk of overheating and subsequent damage.
Fig.
8
Switching on and off
To switch the vacuum cleaner on or off, press the
rotary control.
Fig.
9
Controlling the suction level
Turn the rotary control to infinitely adjust the suction
level to the level required.
min -
For vacuuming curtains and delicate textiles
- For vacuuming upholstered furniture and
cushions
- For vacuuming delicate rugs und for daily vacu-
uming of lightly soiled floors
- For vacuuming durable floor coverings
max -
For vacuuming hard floors and heavily soiled
rugs and carpets
Vacuuming
!
Caution:
Floor nozzles are subject to a certain amount of
wear, depending on the type of hard floors you have
(e.g. rough, rustic tiles). You must therefore check
the underside of the floor nozzle at regular intervals.
Worn undersides of floor nozzles may have sharp
edges that can damage sensitive hard floors, such as
parquet or linoleum. The manufacturer does not ac-
cept any responsibility for damage caused by worn
floor nozzles.
Fig.
10
Set the adjustable floor nozzle:
Rugs and carpets
=>
Hard floors/parquet
=>
Fig.
11
Vacuuming with accessories
Attach the nozzles to the suction pipe or handle as re-
quired:
a)
Crevice nozzle for vacuuming crevices and corners,
etc.
b)
Upholstery nozzle for vacuuming upholstered furni-
ture, curtains, etc.
After use, reinsert the crevice nozzle and upholstery
nozzle into the accessories holder.
c)
Hard-floor nozzle
- with clip-in edge cleaning bristles:
For gentle but effective cleaning of hard floor
coverings (tiles, parquet, etc.)
- without edge cleaning bristles:
For cleaning dirt in gaps and cracks
The edge cleaning bristles can be removed by
pushing the two catches in the direction of the ar-
rows.
Fig.
12
You can use the parking aid on the back of the vacu-
um cleaner if you want to stop vacuuming for a short
time.
After switching off the appliance, slide the hook on
the floor nozzle into the recess on the back of the
appliance.
Fig.
13
To overcome obstacles, e.g. steps, the appliance can
also be carried by the handle on the appliance body.
