CONTACT US FOR A QUOTE TODAY
1-800-731-1722
WWW.IDEALSHIELD.COM
21
Power Xpress™ Dual Bollard Charge Station
Installation Guide
576414 Rev. A
Figure 27. Bollard installed over Mounting
Bolts
9.
With assistance, lift bollard onto mounting
bolts.
10. Level, adjust, and tighten mounting nuts
according to anchor manufacturer specification.
11.
Loop the cables onto the cable-management
holder.
ss01429
Figure 28. Remove Strain Relief
12.
Remove the strain-relief assembly from the
wiring chamber.
Figure 29. Trim Wire to Length
13.
Trim the wire to a length sufficient to make
the connections to the Charge Station terminal
block.
Figure 30. Trim Wire to Length
14.
Strip back 1 1/4 in. (32 mm) of the wire jacket
and 3/8 in. (10 mm) from the ends of the
individual conductors.