18
Intensive Drying
The final rinse uses a higher temperature which improves the drying
results. The running time may increase slightly.
To turn intensive drying on:
1
Press the
[On/Off]
button.
2 Hold down the “
A
” button and press
[Start]
until the display indi-
cates “
d:00
”. Release both buttons
3 Press the “
A
” button until the display shows “
d:00
”.
4 Press the “
C
” button to turn intensive drying on or off. “
d:01
” = ON
and “
d:00
” = OFF and press
[Start]
to save setting.
Auto Power Off (model dependent)
To save energy, the dishwasher is turned off 1 minute after the wash
cycle ends. This setting can be adjusted from P:00 to P:02.
To change the setting:
1
Press the
[On/Off]
button.
2 Hold down the
“A”
button and press
[Start]
until the display indi-
cates
“d:0x”
(x can be any number). Release both buttons.
3 Press the
“A”
button until the display indicates
“P:0x”
.
4 Press the
“C”
button until the display corresponds with your require-
ments.
P:00
= dishwasher does not turn off automatically
P:01
= dishwasher turns off automatically after 1 minute
P:02
= dishwasher turns off automatically after 120 minutes (2 hours)
5
Press
[Start]
to save the setting
.
InfoLight® (model dependent)
An LED illuminates the floor to indicate the unit is running. If the appliance is
installed at eye-level, the LED is not visible.
To change the setting:
1
Open the door and press the
[On/Off]
button.
2 Hold down the “
A
” button and press
[Start]
until the display indicates
“
d:00
”.
3 Release both buttons.
4 Press the “
A
” button until the display shows “
1:01
”.
5 Press the “
C
” button to switch between “
1:01
” = ON and “
1:00
” = OFF
and press
[Start]
to save.
Child Lock (model dependent)
1
Start the desired cycle.
2 Hold down the button that says “Child Lock” underneath it for approxi-
mately 3 seconds until the display reads “
CL
”.
3 The “
CL
” will be indicated now if any button is pressed and the pro-gram
will not be reset.
To deactivate the child lock, hold down the “Child Lock” button for approxi-
mately 3 seconds until the display no longer reads “
CL
”.
