background image

Accessories

 en

13

5.4 Cooking compartment

The functions in the cooking compartment make your
appliance easier to use.

Rails

The rails in the cooking compartment enable you to
place accessories at different heights.
The cooking compartment has five shelf positions. The
shelf positions are numbered from bottom to top.
You can remove the rails, e.g. for cleaning. 
→ 

"Rails", Page 20

Lighting

The oven light lights up the cooking compartment.
To illuminate the cooking compartment, press the lamp
button.

Steam outlet

The hot air from the cooking compartment escapes at
the rear of the hob.

ATTENTION!

Covering the ventilation slots will cause the appliance
to overheat.

Do not cover the ventilation slots.

Appliance door

If you open the appliance door during operation, the
operation continues.

Condensation

Condensation can occur in the cooking compartment
and on the appliance door when cooking. Condensa-
tion is normal and does not adversely affect appliance
operation. Wipe away the condensation after cooking.

6  Accessories

Use original accessories. These have been made espe-
cially for your appliance.

Note: 

Heat may deform the accessory. This deforma-

tion has no effect on the function. When the accessory
cools down, it will regain its original shape.

The accessories supplied may differ depending on the
appliance model.

Accessories

Use

Wire rack

¡

Baking tins

¡

Ovenproof dishes

¡

Cookware

¡

Meat, e.g. roasting joints or steak

¡

Frozen meals

Universal pan

¡

Moist cakes

¡

Biscuits

¡

Bread

¡

Large roasts

¡

Frozen meals

¡

Catching dripping liquids, e.g. fat when
grilling food on the wire rack.

Protecting plate

¡

When grilling

¡

Protects the control panel and control
knobs against high temperatures when
grilling

6.1 Using the accessory

Always slide the accessory into the cooking compart-
ment correctly. This is the only way that you can re-
move the accessory halfway without it tipping.

1.

Insert the accessory between the two guide rods for
a shelf position.

Wire rack

Insert the wire rack with the open
side facing the appliance door and
the curved lip   facing downwards.

Baking tray
E.g. univer-
sal pan or
baking tray

Slide the tray in with the sloping
edge facing the appliance door.

Summary of Contents for HGA120B50M









































Reviews: