en
Time-setting options
18
If the flame is not burning, repeat the steps.
8.
Once the food is cooked, switch off the function se-
lector. Once the oven has cooled down, remove the
protective plate.
11 Time-setting options
Your appliance is equipped with a time-setting option
that can be used to set the timer.
11.1 Timer
The timer can be used as a kitchen timer.
The timer runs alongside other settings. The timer can
be set at any time, even if the appliance is switched off.
Note:
The timer has no effect on how the oven works. It
can only be used as a kitchen timer.
Setting the timer
The timer can be set up to 60 minutes regardless of
whether the appliance is on or off.
1.
Set the timer to the required cooking time.
2.
Once the timer duration has elapsed
‒
An audible signal sounds. The timer automatic-
ally switches to the Off position.
12 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
12.1 Cleaning agent
To avoid damaging the different surfaces of the appli-
ance, do not use unsuitable cleaning agents.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
▶
Do not use steam- or high-pressure cleaners to
clean the appliance.
ATTENTION!
Unsuitable cleaning agents damage the surfaces of the
appliance.
▶
Do not use aggressive or abrasive cleaning agents.
▶
Do not use cleaning products with a high alcohol
content.
▶
Do not use hard scouring pads or cleaning
sponges.
▶
Do not use any special cleaners if the appliance is
still warm.
Using oven cleaner in a hot cooking compartment
damages the enamel.
▶
Do not use oven cleaner in the cooking compart-
ment when it is still warm.
▶
Remove all food remnants from the cooking com-
partment and the appliance door before you next
heat up the appliance.
New sponge cloths contain residues from production.
▶
Wash new sponge cloths thoroughly before use.
Suitable cleaning agents
Only use cleaning agents that are suitable for the differ-
ent surfaces on your appliance.
Follow the instructions on cleaning the appliance.
→
"Cleaning the appliance", Page 19
Appliance
Surface
Suitable cleaning agents Information
Stainless steel
¡
Hot soapy water
¡
Special stainless steel
cleaning products
suitable for hot sur-
faces
To prevent corrosion, remove any limescale, grease, starch or albu-
min (e.g. egg white) stains on stainless steel fronts immediately.
Apply a thin layer of the stainless steel cleaning product with a soft
cloth.
Enamel, plastic,
painted, and
screen-printed
surfaces
E.g. control panel
¡
Hot soapy water
Do not use glass cleaner or a glass scraper.
Knobs
¡
Hot soapy water
Clean with a dish cloth and dry with a soft cloth.
Do not remove or scrub.
