English 7
Burner Caps
The cooktop has three different burner sizes; small,
medium, and large. Match the corresponding letters on the
burner cap and burner base.
The burner cap is porcelainized steel. The burner caps
must be properly placed for the cooktop to function
properly. If the burner cap is not properly placed, one or
more of the following problems may occur:
•
Burner flames are too high.
•
Flames shoot out of burners.
•
Burners do not ignite.
•
Burner flames light unevenly.
•
Burner emits gas odor.
Placing Burner Caps
Each cap has a letter (A, D, or F) cast in the underside of
the cap that corresponds to a letter (A, D, or F) cast in the
burner base that is attached to the appliance.
•
Place each burner cap on its correct burner base per
its corresponding letter designation.
See figure
“Burners Caps” on page 8
.
Place burner cap gently on top of base so that the prongs
of the burner base fit snugly into the groove of the burner
cap.
Checking Burner Cap Placement
•
Check to make sure there is not gap between the
burner cap and burner base.
See figure “Burner Cap
Placement” on page 8
to see the correct and incorrect
placements of the burner cap.
•
You may gently try to move the burner cap from side to
side to check if it is properly placed. If properly placed,
9
WARNING
To prevent flare-ups and avoid creation of harmful
by-products, do not use the cooktop without all
burner caps and all burner grates properly
positioned.
Burner Grate
Burner Cap
Burner
Cooktop
Ignitor
9
WARNING
To prevent burns, do not touch burner caps or
grates while hot. Turn the cooktop off and allow the
burners to cool..
Burner Base
Burner Cap
Matching letter
designation.
Summary of Contents for HDI8054C
Page 1: ...Slide In Ranges HDIP054U HDIP054C HDI8054U HDI8054C ...
Page 2: ......
Page 102: ......
Page 103: ......