Bosch HBM13B1.0B, Instruction Manual

Page: 11 / 24

11
End time
You can delay the time at which you wish your dish to be ready.
The
ó
main oven starts automatically and finishes at the
desired time. You can, for example, put your dish in the
compartment in the morning and set the cooking time so that it
is ready at lunch time.
Ensure that food is not left in the cooking compartment for too
long as it may spoil.
Example shown below: It is 10:30 , the cooking time is
45 minutes and the main oven is required to finish cooking at
12:30.
1.
Turn the function and temperature selector to set the heating
type and temperature for the main oven.
2.
Press the 0 button twice.
3.
Use the @ or A button to set the cooking time.
4.
Press the 0 button. The brackets are around p . The time
when the dish will be ready is displayed.
5.
Use the button
@
or
A
to delay the end time.
After a few seconds, the oven adopts the settings and
switches to standby. The display shows the time at which the
dish will be ready and the p symbol is in brackets. The
symbols
U
and
0
go out. When the main oven starts, the
cooking time counts down in the display and the r symbol is
shown in brackets. The p symbol goes out.
The cooking time has elapsed
A signal sounds. The main oven stops heating. 00:00 is shown
in the display. Press the 0 button. The @ or A buttons can be
used to set a new cooking time. Or press the 0 button twice
and turn the function and temperature selector to the off
position. The main oven is switched off.
Changing the end time
Use the
@
or
A
button to change the end time. After a few
seconds, the change is adopted. If the timer has been set, first
press the 0 button twice. Do not change the end time if the
cooking time has already started to elapse. The cooking result
would no longer be correct.
Cancelling the end time
Use the
A
button to set the end time back to the current time.
After a few seconds, the change is adopted. The main oven
starts. If the timer has been set, first press the 0 button twice.
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The symbol for the time-setting
option that is visible in the display is shown in brackets.
To call up the
U
timer,
r
cooking time,
p
end time or
0
clock, press the 0 button repeatedly until the brackets are
around the relevant symbol. The display shows the value for a
few seconds.
Clock
After the appliance is connected or following a power cut, the
0 symbol and four zeros flash in the display. Set the clock.
1.
Press the
0
button.
The clock in the display shows 12:00. The time symbols light
up and the brackets are around
0
.
2.
Use the
@
or
A
button to set the clock.
After a few seconds, the time that has been set is adopted.
Changing the clock
No other time-setting option should have been set.
1.
Press the
0
button four times.
The time symbols light up in the display and the brackets are
around
0
.
2.
Use the
@
or
A
button to change the clock.
After a few seconds, the time that has been set is adopted.
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings .
Childproof lock
The ó main oven has a childproof lock to prevent children from
switching it on by accident or changing a setting.
The main oven does not respond to any settings. You can still
set the clock and the timer when the childproof lock is
activated.
If the heating type and temperature or grill setting are set for the
main oven, the childproof lock interrupts the heater element.
Switching on the childproof lock
No cooking time or end time may be set.
Press and hold the
D
button for approximately 4 seconds.
The
D
symbol appears in the display. The childproof lock is
activated.
Switching off the childproof lock
Press and hold the D button for approximately 4 seconds.
The
D
symbol in the display goes out. The childproof lock is
deactivated.