-21-
Assembly
Inserting and Releasing
Battery Pack
T h i s t o o l i s e q u i p p e d w i t h A u t o m a t i c
R e s t a r t P r o t e c t i o n . T h i s f e a t u r e h e l p s
prevent accidental startups after power has
b e e n i n t e r r u p t e d , e . g . t h e b a t t e r y w a s
removed with the switch locked in the on
position. To resume operation, turn the side
switch to the off position, and back to on
position to restart the tool.
Make sure that the side switch (Fig. 1) is in
the off position before inserting or removing
battery pack. To insert the battery pack
slide it into the housing until the battery
pack locks into position.
To insert the battery pack slide it into the
housing until the battery pack locks into
position.
Your tool is equipped with a secondary
locking latch to prevent the battery pack
from completely falling out of the handle,
should it become loose due to vibration.
T o r e m o v e t h e b a t t e r y p a c k , p r e s s t h e
battery pack release button and slide the
battery pack forward (Fig. 16).
Press the battery pack release button again
and slide the battery pack completely out of
tool housing.
Fig. 16
160992A61E 08-21 GWX18V8.qxp_GWX 9/1/21 8:29 AM Page 21
