20
| English
1 609 929 W41 | (11/6/10)
Bosch Power Tools
Assembly
Delivery Scope
Please also observe the represen-
tation of the delivery scope at the
beginning of the operating instruc-
tions.
Before assembling the saw stand, check if all
parts listed below are provided:
Additionally required tools (not in delivery
scope):
– Phillips screwdriver
– Open-end spanner (10 mm, 8 mm, 6 mm)
– Adjustable spanner
Assembling the Mobile Stand Base
– Carefully remove all parts included in the de-
livery from their packaging.
– Remove all packaging material. (e. g. cable
ties, etc.)
– For assembly, follow figures A – E. Also ob-
serve the following notes.
For Fig. B:
The wheels are marked for easier assembly (“R”
for right wheel, “L” for left wheel).
Note:
Do not over-tighten the nuts. Parts bolted
together must move freely.
For Fig. D:
Observe the correct assembly direction of sup-
porting frame
18
, which is indicated by the
marks “R” and “L” matching the wheels.
Note:
Do not over-tighten the nuts. Parts bolted
together must move freely.
For Fig. E1:
In this assembly step, the saw stand
2
is bolted
together with the supporting frame rest
18
and
the upper frame rest
13
.
– Set both rest so that the lateral recesses in
the rests face towards the handle.
– While bolting the saw stand together, take
care that the support
8
is always in the fix-
ture of the bottom frame
17
.
Note:
Only hand-tighten the nuts at first. After
all eight bolts are correctly positioned, they can
be firmly tightened.
For Fig. E2:
Note:
Do not over-tighten the nuts. Parts bolted
together must move freely.
No. Designation
Quantity
1
Attachment set
2
2
Saw stand with support
8
1
13
Upper frame
with lock
3
1
17
Bottom frame
1
14
Foot lever
1
15
16
Wheel “L”
Wheel “R”
1
1
18
Supporting frame
1
19
Fastening kit
consisting of:
– Hexagon bolt
M10 x 100
M10 x 55
M10 x 50 (self-locking)
M8 x 45
M6 x 45
– Phillips screw
M8 x 50
– Washer
M10 x 29 mm
M10
M8
M6
– Lock nut
M10
M8
M6
4
1
2
4
8
4
2
10
4
8
5
4
8
OBJ_BUCH-854-004.book Page 20 Friday, June 11, 2010 1:22 PM
