10
| English
1 609 92A 0WY | (15.10.14)
Bosch Power Tools
Apply the power tool to the screw only when it is
switched off.
Rotating tool inserts can slip off.
Adjust the gear switch only when the machine is at a
complete stop.
If the gear switch cannot be pushed to the stop, turn
the drill chuck a little.
The battery charge-control indicator consists of three green
LEDs, and indicates the charge condition of the battery for a
few seconds when the On/Off switch is pressed halfway or fully.
To save energy, only switch the power tool on when using it.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer
manner.
LED
Capacity
Continuous lighting 3 x green
≥ 2/3
Continuous lighting 2 x green
≥1/3
Continuous lighting 1 x green
< 1/3
Flashing light 1 x green
Reserve
Symbol
Meaning
GSB 10,8-2-LI:
Combination Cordless Drill
Grey-marked area: Handle (insulated
gripping surface)
Article number
Read all safety warnings and all instruc-
tions
Before any work on the machine itself,
remove the battery
Always wear ear protection.
Movement direction
Reaction direction
Right/left rotation
Screwdriving
Drilling without impact
Impact drilling
Low speed
High speed
Switching On
Switching Off
Battery Charge Indicator
U
Rated voltage
n
0
1
No-load speed (1. gear)
n
0
2
No-load speed (2. gear)
n
S
Impact rate
M
Maximum torque according to ISO 5393
Brickwork
Metal
Wood
Ø
Drilling diameter, max.
Ø
Max. screw dia.
Chuck clamping range
Weight according to EPTA-Procedure
01/2003
*
Value dependent of the battery pack
being used
L
wA
Sound power level
L
pA
Sound pressure level
K
Uncertainty
a
h
Vibration total value
T
1
Permitted ambient temperature during
charging
T
2
Permitted ambient temperature during
operation
*
and storage
* Limited performance at temperatures
<0 °C
Recommended batteries
Symbol
Meaning
OBJ_BUCH-1458-005.book Page 10 Wednesday, October 15, 2014 8:41 AM