6 720 817 281 (2017/05)
Greentherm 9800 SEO 160/199 | SECO 199
8 | Appliance details
Safety devices
•
Flame failure device (flame detection via ionization rod)
•
Overheat prevention
•
Inlet water temperature sensor
•
Outlet water temperature sensor
•
Exhaust flue gas temperature sensor
•
Water flow sensor
•
Automatic air flow adjustment independently of altitude,
flue length and flue type
•
Scaling detection sensor (HE flue gas temperature sensor)
Height
inches (mm)
31½ (800)
31½ (800)
Net weight
pounds (kg)
77.5 (35.15)
73.2 (33.20)
Gross weight
pounds (kg)
83.67 (37.95)
79.37 (36.0)
Electrical
Nominal
V AC
120
120
Frequency
Hz
60
60
Amperage (Idle)
mA
40
40
Operation
A
2.4
2.4
Water protection
9)
IP
X5D
X5D
1) These flow are based upon setting the unit to higher temperatures and then mixing down using cold water after the unit, to reach
these flow rates.
2) Input rating is based on sea level operation and need not be changed for operation up to 2000 ft (610 m) elevation. For
operation at elevations above 2000 ft (610 m), input rating is automatically reduced at the rate of 4 percent (US) or 10 percent
(Canada) for each 1000 ft (305 m) above sea level.
3) When converted to LPG the minimum input is 17 000 BTU/hr (5 kW).
4) with constant flow.
5) Can be reprogrammed to achieve up to 140 °F (60 °C) (see chapter 8.4).
6) Requirements: Steady flows, single unit installations, up to 140 °F (60 °C).
7) To measure Gas Pressure, see Measuring Gas Pressure, chapter 6.6, page 25.
8) Activation varies with inlet water temperatures.
9) Protection against water drops.
Technical characteristics
Units
Greentherm 9800 SEO / SECO
Greentherm 9800 SEO
199 000 Btu
160 000 Btu
Table 3
