background image

This appliance is supported in the UK by
Worcester Heat Systems Ltd. - part of the
Bosch Group.

Specialist factory trained Service Engineers are
available to attend a breakdown occurring on
this appliance.

No charge will be made for parts and/or
labour providing:

An appliance fault is found and the appliance
has been installed within the past 24 months.
Reasonable evidence of this must be 
supplied on request.

A call-out charge will be made where:

The appliance has been installed for over 24 
months

OR

Our Field Service Engineer finds no fault with
the appliance (see 

Note

).

OR

The cause of breakdown is misuse or with 
other parts of your plumbing/heating system, 
or with equipment not supplied by Worcester
Heat Systems Ltd.

Note. NO APPLIANCE FAULT IS FOUND ON
OVER 30% OF ALL SERVICE CALL OUTS.

Please read this guide carefully to gain a good
understanding of the operation of your
appliance. In the case of a suspected fault,
refer to the fault finding section of this guide.

If in doubt contact our Technical Helpline

In the event of an appliance fault or breakdown
please contact our Service Department. Your
service administrator will arrange for an
Engineer to call with the minimum of delay.
Under normal circumstances this will be from 1
to 3 working days (excluding weekends) for
priority breakdown situations (no hot water
and/or heating).

Invoices for attendance and repair work carried
out on this appliance by any third party will not
be accepted.

FAULT OR BREAKDOWN

FAULT OR BREAKDOWN

WORCESTER BOSCH GREENSTAR HIGHFLOW 440

6 720 611 731a (08.04)

16

MAI

NTE

NANCE

Summary of Contents for GREENSTAR HIGHFLOW 440






















Reviews: