English |
37
ation, the measuring tool must acclimatise for a
while before calibration is performed.
Accuracy Check of the Distance Measurement
You can check the accuracy of the measuring tool
as follows:
– Choose a measuring section of approx. 3–10 m
in length that is permanently unchanged, the
exact length of which is known to you (e.g. room
width, door opening). The measurement should
be taken under favourable conditions, i.e. the
measuring section should be indoors and the
target surface for the measurement should be
smooth and reflect well.
– Measure the section ten times in succession.
The deviation of the individual measurements from
the mean value must not exceed ±4 mm over the
entire measuring section in favourable conditions.
Record the measurements in order to be able to
compare the accuracy at a later date.
Working with the tripod (accessory)
The use of a tripod is particularly necessary for lar-
ger distances. Place the measuring tool with the
1/4" thread
(13)
on the quick-release plate of the
tripod
(19)
or a conventional camera tripod.
Tighten it using the locking screw of the quick-re-
lease plate.
Bosch Power Tools
1 609 92A 5E4 | (07.05.2020)
