English |
35
setting remains saved after you switch off the
measuring tool.
Practical advice
General Advice
The reception lens
(14)
and the laser beam output
(15)
must not be covered during the measuring
process.
The measuring tool must not be moved while a
measurement is being taken. For this reason, place
the measuring tool against or on a firm surface
whenever possible.
Influences on the measuring range
The measuring range depends on the lighting con-
ditions and the reflective properties of the target
surface. For better visibility of the laser beam
when working outdoors and in bright sunlight, use
the laser viewing glasses
(18)
(accessory) and the
laser target plate
(17)
(accessory) or shade the
target area.
Influences on the measurement result
Due to physical effects, the possibility of inaccur-
ate measurements when measuring various sur-
faces cannot be excluded. These include:
– Transparent surfaces (e.g. glass, water)
– Reflective surfaces (e.g. polished metal, glass)
Bosch Power Tools
1 609 92A 5E4 | (07.05.2020)
