-8-
The numbering of the product features shown
refers to the illustration of the tool on the graphic
page.
1
Exit opening for laser beam
2
Automatic leveling indicator
3
On/Off button / Operating mode button
4
Switch for automatic leveling/ locking the
leveling unit
5
Tripod mount 1/4-20
6
Latch of battery lid
7
Battery lid
8
Laser warning label
9
Positioning device*
10
Mounting screw for positioning device
11
Swiveling disc to move laser left to right
12
Fine adjustment knob
13
Ceiling grid clip
14
Magnets
15
Retractable feet
16
Screw hole for positioning device
17
Laser viewing glasses*
18
Tripod*
19
Laser target measuring plate
20
Protective carrying pouch
*The accessories illustrated or described are
not included as standard delivery.
Features
Article number
. . . . . . . . . . . .
3 601 K73 C10
Working range, min.
1)
. . . . . . . . . . . .50 ft (15 m)
Leveling Accuracy: . . . . . up to ± 3/16 in @ 30 ft
(± 0.5 mm/m)
Self-leveling range, typically . . . . . . . . . . . . ±4°
Leveling duration, typically . . . . . . . . . . . . . . .6 s
Operating temperature . . . . . . . .30° F to 104° F
(–1° C to +40° C)
Storage temperature . . . . . . . . .14° F to 158° F
(–10° C to +70° C)
Relative air humidity, max . . . . . . . . . . . . . 90 %
Laser class . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Laser type . . . . . . . . . . . . . . . . . 635 nm, <1mW
Mount threading . . . . . . . . . . . . . . . . . . . 1/4”-20
Batteries . . . . . . . . . . . . . . . . . . . . . 4 x AA 1.5V
Operating lifetime, approx. . . . . . . . . . . . . . .15 h
Weight . . . . . . . . . . . . . . . . . . . . . . . 1 lb (0.5 kg)
Dimensions . . . . . . . . . . . . . . . .3.8” x 2.6” x 4.7”
(97 x 65 x 120 mm)
The tool can be clearly identified with the serial
number
8
on the type plate.
Technical Data
Preparation
Inserting/Replacing the Battery
Use only alkaline batteries.
To open the battery lid
7
, push the latch of the
battery lid
6
and turn the battery lid up. Insert
the supplied batteries.
When inserting, pay attention to the correct
polarity according to the representation on the
inside of the battery compartment.
Always replace all batteries at the same time.
Only use batteries from one brand and with the
identical capacity.
!
WARNING
Remove the batteries from
the tool when not using it
for extended periods.
When storing for
extended periods, the batteries can corrode and
discharge themselves.
The tool is intended for determining and checking horizontal and vertical level, transfer plumb
points, and squaring. The measuring tool is suitable exclusively for operation in enclosed working
sites.
Intended Use
1)
The working range can be decrease by unfavorable environmental conditions (e.g. direct sun irradiation)
