16
| English
1 609 92A 14V | (10.2.15)
Bosch Power Tools
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only
: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions.
Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for lengthways and crossways cut-
ting of wood with straight cutting lines as well as mitre cuts in
wood while resting firmly on the workpiece. With suitable saw
blades, thin-walled non-ferrous metals, e. g., profiles, can al-
so be sawed.
Working ferrous metals is not permitted.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1
Blade guard
2
Lock-off button for On/Off switch
3
On/Off switch
4
Auxiliary handle (insulated gripping surface)
5
Spindle lock button
6
Scale for mitre angle
7
Wing bolt for parallel guide
8
Wing bolt for bevel-angle preselection
9
Cutting mark, 0°
10
Cutting mark, 45°
11
Parallel guide*
12
Retracting blade guard
13
Riving knife (GKS 85 G)
14
Base plate
15
Lever for retracting blade guard
16
Wing bolt for bevel-angle preselection
17
Chip ejector
18
Handle (insulated gripping surface)
19
Hex key
20
Clamping bolt with washer
21
Clamping flange
22
Saw blade*
23
Mounting flange
24
Saw spindle
25
Screw for attachment of riving knife (GKS 85 G)
26
Extraction adapter*
27
Fastening screw for extraction adapter (GKS 85)*
28
Clamping lever for cutting-depth preselection
29
Cutting-depth scale
30
Set of screw clamps*
31
Guide rail*
32
Connection piece*
33
Vacuum hose*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Circular Saw
GKS 85
GKS 85 G
Article number
3 601 E7A 0..
3 601 E7A 9..
Rated power input
W
2200
2200
No-load speed
min
-1
5000
5000
Rotational speed under load, max.
min
-1
3500
3500
Cutting depth, max.
– for 0° bevel angle
– for 45° bevel angle
mm
mm
85
65
85
65
Spindle lock
Constant electronic control
–
Reduced starting current
Base plate dimensions
mm
383 x 170
406 x 208
Saw blade diameter, max.
mm
235
235
Saw blade diameter, min.
mm
230
230
Blade thickness, max.
mm
2.2
2.2
Tooth thickness/setting, max.
mm
3.2
3.2
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
OBJ_BUCH-293-007.book Page 16 Tuesday, February 10, 2015 8:40 AM
