22
| English
1 609 929 T86 | (16.12.09)
Bosch Power Tools
Intended Use
The machine is intended for lengthways and
crossways cutting of wood with straight cutting
lines as well as mitre cuts in wood while resting
firmly on the workpiece. With suitable saw
blades, thin-walled non-ferrous metals, e. g.,
profiles, can also be sawed.
Working ferrous metals is not permitted.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1
Lock-off button for On/Off switch
2
On/Off switch
3
Battery*
4
Blade guard
5
Lever for retracting blade guard
6
Base plate
7
Retracting blade guard
8
Parallel guide
9
Cutting mark, 0°
10
Cutting mark, 45°
11
Wing bolt for bevel-angle preselection
12
Wing bolt for parallel guide
13
Scale for mitre angle
14
Spindle lock button
15
Auxiliary handle (insulated gripping surface)
16
Allen key
17
Handle (insulated gripping surface)
18
Saw spindle
19
Mounting flange
20
Saw blade*
21
Clamping flange
22
Clamping bolt with washer
23
Marks on the blade guard
24
Battery unlocking button
25
Fastening screw for extraction adapter
26
Extraction adapter
27
Vacuum hose*
28
Cutting-depth scale
29
Clamping lever for cutting-depth
preselection
30
Set of screw clamps*
31
Button for charge-control indicator*
32
Battery charge-control indicator*
33
Guide rail*
34
Connection piece*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Noise/Vibration Information
Measured sound values determined according
to EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 95 dB(A);
Sound power level 106 dB(A). Uncertainty
K =1.5 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
h
=3.0 m/s
2
, Uncer-
tainty K =1.5 m/s
2
.
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
OBJ_BUCH-755-003.book Page 22 Wednesday, December 16, 2009 9:18 AM
