English |
9
Bosch Power Tools
1 609 92A 34E | (7.6.16)
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions.
Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for stationary use with cutting discs
to perform lengthways and crossways straight cuts or mitre
cuts to 45° in metal materials without the use of water.
Product Features
The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1
Lock-off button for On/Off switch
2
On/Off switch
3
Handle
4
Retracting blade guard
5
Spindle lock
6
Cutting disc
7
Angle stop
8
Clamping spindle
9
Quick-release button
10
Spindle handle
11
Mounting holes
12
Hex key (8 mm)
13
Base plate
14
Locking screw for angle stop
15
Transport safety-lock
16
Tool arm
17
Transport handle
18
Blade guard
19
Spark guard
20
Tool spindle
21
Clamping flange
22
Washer
23
Hexagon bolt
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
Technical Data
Noise/Vibration Information
Sound emission values determined according to
EN 61029-2-10.
Typically the A-weighted noise levels of the product are:
Sound pressure level 100.5 dB(A); Sound power level
113.5 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 61029-2-10: a
h
=2.5 m/s
2
,
K=1.5 m/s
2
.
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 61029 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
Symbol
Meaning
Keep hands away from the cutting ar-
ea while the machine is running.
Dan-
ger of injury when coming into contact
with the cutting disc.
Wear ear protectors.
Exposure to
noise can cause hearing loss.
Wear safety goggles.
Wear a dust respirator.
Wear protective gloves.
Cut-off grinder
GCO 200
Article number
3 601 M38 0..
Rated power input
W
2000
No-load speed
min
-1
3800
Weight according to
EPTA-Procedure 01:2014
kg
17.0
Protection class
/
II
Permissible workpiece dimensions (maximum/minimum) see page 11.
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Dimensions of suitable cutting discs
Cutting disc diameter, max.
mm
355
Cutting discs width, max.
mm
3
Mounting hole diameter
mm
25.4
OBJ_BUCH-1064-004.book Page 9 Tuesday, June 7, 2016 2:16 PM
