English |
17
Bosch Power Tools
1 609 92A 0JA | (22.6.15)
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with all rele-
vant provisions of the directives 2009/125/EC (Regulation
1194/2012), 2011/65/EU, until 19 April 2016:
2004/108/EC, from 20 April 2016 on: 2014/30/EU,
2006/42/EC including their amendments and complies with
the following standards: EN 60745-1, EN 60745-2-6.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
Leinfelden, 08.06.2015
Technical Data
Henk Becker
Executive Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Rotary Hammer
GBH 36 V-LI Plus
GBH 36 VF-LI Plus
Article number
3 611 J06 0..
3 611 J07 0..
Speed control
Stop rotation
Right/left rotation
Quick change chuck
–
Rated voltage
V=
36
36
Rated power input
W
600
600
Impact rate
min
-1
0–4200
0–4200
Impact energy per stroke according to
EPTA-Procedure 05/2009
J
3.2
3.2
Rated speed
– Right rotation
– Left rotation
min
-1
min
-1
0–940
0–930
0–940
0–930
Tool holder
SDS-plus
SDS-plus
Spindle collar diameter
mm
50
50
Drilling diameter, max.:
– Concrete
– Brickwork (with core bit)
– Steel
– Wood
mm
mm
mm
mm
28
82
13
30
28
82
13
30
Weight according to EPTA-Procedure 01:2014
kg
4.0/4.5*
4.1/4.6*
Permitted ambient temperature
– during charging
– during operation** and during storage
°C
°C
0...+45
–20...+50
0...+45
–20...+50
Recommended batteries
GBA 36V ...
GBA 36V ...
Recommended chargers
AL36..
GAL 36..
AL36..
GAL 36..
* depending on the battery pack being used
* * Limited performance at temperatures <0 °C
Technical data determined with battery from delivery scope.
OBJ_BUCH-283-012.book Page 17 Monday, June 22, 2015 10:28 AM
