16
| English
1 609 92A 0JA | (22.6.15)
Bosch Power Tools
Use appropriate detectors to determine if utility lines
are hidden in the work area or call the local utility com-
pany for assistance.
Contact with electric lines can lead
to fire and electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes property dam-
age.
When working with the machine, always hold it firmly
with both hands and provide for a secure stance.
The
power tool is guided more secure with both hands.
Secure the workpiece.
A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
Always wait until the machine has come to a complete
stop before placing it down.
The tool insert can jam and
lead to loss of control over the power tool.
Do not open the battery.
Danger of short-circuiting.
Protect the battery against heat, e. g., against
continuous intense sunlight, fire, water, and mois-
ture.
Danger of explosion.
In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek
medical help in case of complaints.
The vapours can irri-
tate the respiratory system.
Use the battery only in conjunction with your Bosch
power tool.
This measure alone protects the battery
against dangerous overload.
The battery can be damaged by pointed objects such as
nails or screwdrivers or by force applied externally.
An
internal short circuit can occur and the battery can burn,
smoke, explode or overheat.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions.
Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for hammer drilling in concrete,
brick and stone, as well as for light chiselling work. It is also
suitable for drilling without impact in wood, metal, ceramic
and plastic. Machines with electronic control and right/left ro-
tation are also suitable for screwdriving.
The light of this power tool is intended to illuminate the power
tool’s direct area of working operation and is not suitable for
household room illumination.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1
Quick change keyless chuck (GBH 36 VF-LI Plus)
2
SDS-plus quick change chuck (GBH 36 VF-LI Plus)
3
SDS-plus tool holder
4
Dust protection cap
5
Locking sleeve
6
Lock ring for rapid-change chuck
(GBH 36 VF-LI Plus)
7
Vibration damper
8
Rotational direction switch
9
Handle (insulated gripping surface)
10
On/Off switch
11
Battery pack*
12
Release button for mode selector switch
13
Mode selector switch
14
Worklight
15
Button for depth stop adjustment
16
Auxiliary handle (insulated gripping surface)
17
Depth stop
18
Battery unlocking button
19
Temperature control indicator
20
Battery charge-control indicator
21
Button for charge-control indicator
22
Securing screw for key type drill chuck
(GBH 36 V-LI Plus) *
23
Key type drill chuck (GBH 36 V-LI Plus) *
24
SDS-plus adapter shank for drill chuck
(GBH 36 V-LI Plus) *
25
Drill chuck mounting(GBH 36 VF-LI Plus)
26
Identification grooves
27
Chuck key(GBH 36 V-LI Plus)
28
Front sleeve of the quick change keyless chuck
(GBH 36 VF-LI Plus)
29
Retaining ring of the quick change keyless chuck
(GBH 36 VF-LI Plus)
30
EPC switch (Electronic Precision Control)
31
Universal bit holder with SDS-plus shank*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-6.
Typically the A-weighted noise levels of the product are:
Sound pressure level 90 dB(A); sound power level
101 dB(A). Uncertainty K=3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745-2-6:
Hammer drilling into concrete: a
h
=14.5 m/s
2
, K=1.5 m/s
2
,
Chiselling: a
h
= 9.5 m/s
2
, K= 1.5 m/s
2
.
Drilling into metal: a
h
<2.5 m/s
2
, K=1.5 m/s
2
Screwdriving without impact: a
h
<2.5 m/s
2
, K=1.5 m/s
2
.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
OBJ_BUCH-283-012.book Page 16 Monday, June 22, 2015 10:28 AM
