18
| English
Rotary hammer
GBH 36 V-LI Plus
GBH 36 VF-LI Plus
Impact energy per stroke according to
EPTA-Procedure 05:2016
J
3.2
3.2
Rated speed
– Clockwise
min
-1
0–940
0–940
– Anticlockwise
min
-1
0–930
0–930
Tool holder
SDS plus
SDS plus
Spindle collar diameter
mm
50
50
Max. drilling diameter:
– Concrete
mm
28
28
– Masonry (with hollow core bit)
mm
82
82
– Steel
mm
13
13
– Wood
mm
30
30
Weight according to EPTA-Proced-
ure 01:2014
B)
kg
4.0–4.5
4.1–4.6
Permitted ambient temperature
– during charging
°C
0 to +45
0 to +45
– during operation
C)
and during stor-
age
°C
–20 to +50
–20 to +50
Recommended rechargeable batteries
GBA 36V...
GBA 36V...
Recommended chargers
GAL 36..
GAL 36..
A) Measured at 20–25 °C with rechargeable battery
GBA 36V 6.0Ah
.
B) Depends on battery in use
C) Limited performance at temperatures < 0 °C
Technical data determined using the battery that comes with the product.
Noise/Vibration Information
Noise emission values determined according
to
EN IEC 62841-2-6
.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level
90
dB(A); sound power
level
101
dB(A). Uncertainty K =
3
dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to
EN IEC 62841-2-6
:
Hammer drilling into concrete: a
h
=
11.1
m/s
2
, K=
1.5
m/s
2
,
Chiselling: a
h
=
10.7
m/s
2
, K=
1.5
m/s
2
,
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Rechargeable battery
Bosch
sells some cordless power tools without a re-
chargeable battery. You can tell whether a rechargeable bat-
tery is included with the power tool by looking at the pack-
aging.
Charging the battery
u
Use only the chargers listed in the technical data.
Only
these chargers are matched to the lithium-ion battery of
your power tool.
Note:
The battery is supplied partially charged. To ensure
full battery capacity, fully charge the battery in the charger
before using your power tool for the first time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging process
does not damage the battery.
The lithium-ion battery is protected against deep discharge
by the "Electronic Cell Protection (ECP)". When the battery
1 609 92A 70H | (21.12.2021)
Bosch Power Tools
