6 720 800 817 (2012/02)
Adjusting the MAIN MENU
|
31
6.2 Heating program
Main menu: Heating
6.2.1 Time programs for heating
Heating programs control central heating
operation. There are three modes for heating
operation:
•
Comfort
•
Economy
•
Frost
(frost protection)
For each of the operating modes, there is a set
room temperature stored on the FR 120 heating
controller (
Æ
chapter 6.2.2, page 32).
The heating programme includes only switching
times for one week (7-day program).
For this, a time/temperature profile with
specified temperatures for the operation modes
Comfort
/
Economy
/
Frost
can be
created.
Fig. 13
Example: time/temperature profile for
the heating program
Menu: Heating > Programme
Use this menu to change the heating program for
the respectively associated heating circuit.
The heating program is only active if the mode
selector is set to.
•
Reset factory settings
: Resets heating
program to factory settings
Æ
page 23.
Menu: Heating > Programme > All days ...
Sunday
Use this menu to change the heating program
with the same times for the selected group of
days or for individual days (e.g.
Thursday
: start
every Thursday at the same time with the
selected operating mode).
•
P1
,
P2
...
P6
: Up to six switching times per
day and three different operating modes
(
Comfort
/
Economy
/
Frost
).
–
The shortest switching interval is 15
minutes (= 1 segment).
–
Deactivate switching times that are not
required by deleting them.
–
Skip switching times and operating modes
that are not to be changed with
or
Set the flow temperature controller
on the heating appliance to the
maximum required flow
temperature.
[°C]
[t]
6 720 612 481-70.1J
If, for example, the programming for
Thursday
differs from the other
days of the week, amongst the
option
All days
and
Mon - Fri
,
----- from --:--
appears for all values.
In other words there are no
common switching times and
operating modes for this selection.
