Bosch FPA-1200, System Information

Page: 108 / 174

108 en | Installation Modular fire panel
07.2020 | 12.0 | F.01U.028.089 System Information Bosch Sicherheitssysteme GmbH
Labeling Connection
2 Ground
5 Door release magnet, +12 V/24 V, approx. 10 W
8 Key deposit lock monitoring
6 | 7 Ground
9 Heating, +24 V, approx. 8 W
10 Ground
FSE+ | − FSE release element monitoring
⊗ + | − Signal lamp, e.g. BEGA lamp +24 V, approx. 10 W
Relay 1-4
Information on the redundant connection of the module can be found in Redundancy, page 34.
The technical data can be found in
ENO 0000 B Fire Service Interface Module, page 151.
4.9.6 FPE‑5000‑UGM Interface Module
The FPE-5000-UGM Interface Module allows the stand alone fire panel or the panel network to
be connected to a higher-level system such as the UGM or to fire service devices such as FMF-
FAT/FMF-FBF-FAT. The module provides two bi-directional transmission paths.
The module has two LEDs per transmission path for indicating the status (green =
transmission, yellow = fault), and a key for testing the LEDs.
Figure 4.57: FPE‑5000‑UGM Interface Module
Labeling Connection
SDI 1 + | - Transmission path 1 Data input + | -
SDO 1 + | - Data | -
SDI 2 + | - Transmission path 2 Data input + | -
SDO 2 + | - Data | -
Information on the redundant connection of the module can be found in
Redundancy, page 34.
The technical data can be found in FPE‑5000‑UGM Interface Module, page 152.