6 720 803 029 (2011/08)
Modules for control units CSM 7x0, CFB 8x0 and CFB 9x0
32
|
Module assembly for control units CFB 9x0
When removing and replacing a module
z
Disconnect leads for the respective module and fix in standby position
(more detailed information can be found in the mounting instructions
for control units CFB 9x0).
z
Pull module out of the control unit.
z
Push new module from above into the free slot by pressing on the
sensor strip (
Æ
Fig. 20, Page 31), until you hear it click into place.
z
Connect sensor leads and pump connections to the correct positions
on the module.
z
Plug the 230 V module connector into the correct position on the
terminal strip (for module connection at slot 1,
Æ
Fig 21
Providing the 230 V power supply
USER INFORMATION
The connector clips are locked to prevent slippage.
z
When removing the terminals push the locking tab upwards.
