6 720 803 029 (2011/08)
Modules for control units CSM 7x0, CFB 8x0 and CFB 9x0
14
|
Module assembly for control units CSM 7x0
When removing and replacing a module
z
Disconnect leads for the respective module and fix in standby position
(more detailed information can be found in the mounting instructions
for control units CSM 7x0).
z
Pull module out of the control unit.
z
Push new module from above into the free slot by pressing on the
sensor strip (
Æ
Fig. 6) until it clicks audibly into place.
Fig 6
Inserting a module
