14
en | Preparing for installation
FLEXIDOME IP starlight 8000i
2021-02 | V02 | F.01U.385.211
Installation manual
Bosch Security Systems B.V.
4.3
Wiring
1 10-pin I/O connector.
2 2-pin 24V AC / 12-26V DC power input
connector.
3 RJ45 network connector.
4.3.1
Network and PoE power
Connect the camera to a 10/100 Base-T network:
–
Use STP Category 5e (or higher) cable with RJ45 connectors (the camera network socket
is Auto MDIX compliant).
–
Power can be supplied to the camera via the Ethernet cable compliant with the Power-
over-Ethernet standard and/or via the 24V AC / 12-26V DC auxiliary power.
i
Notice!
Use only PoE approved devices.
Power-over-Ethernet (PoE) can be connected at the same time as a 24V AC / 12-26V DC power
supply. If auxiliary power (24V AC / 12-26V DC) and PoE is applied simultaneously, the camera
draws its power from PoE by default, and seamlessly switches to auxiliary input if PoE power
fails.
