Bosch FERION 4000 O, Manual

Page: 33 / 100

Smoke Alarm Mounting | en 33
Bosch Sicherheitssysteme GmbH 02.2016 | 3.2 | F.01U.309.849
Old devices are not to be disposed of with the household
waste. Dispose of them according to the guidelines for
electric and electronic waste at the local collection
points.
Parts included
1 smoke alarm device: base (3.A) and detector head (3.B)
Fastening material: 1 screw, 1 plug
2 Mounting
Notice!
The device is designed for mounting according to DIN 14676
on flat or slanted ceiling. Wall mounting is not allowed.
Perform the following steps. Find exact information about the single
steps on the following pages in this manual. See also the graphics at
the beginning of this manual.
1. Determination of mounting locations. (1) Observe the information
regarding Unsuitable locations for mounting, page 34 , and regarding
Audibility, page 34 . Each device is to be mounted horizontally on
the ceiling in centered position with a minimum distance of 0.5m to
walls and objects. On slanted ceilings >20° it is to be mounted 0.5m
to 1m from the top of the ceiling. (2.A), (2.B), (2.C), (2.D)
2. For each device: Mounting the base . (5) Observe the mark (5.2) for
adjusting the emergency light and the marks (5.1) for alignment
with BOSCH label/siren.
3. Functional check, page 34 , for each device after setting it up into
operation. (6) (7)