6
INITIAL PREPARATIONS
•
The camera’s voltage regulator board
(VRB) accepts an input voltage of either
12V
dc
or 24V
ac
, and a range in-between,
from a regulated power supply.
•
The VRB automatically switches between
ac
or
dc
inputs, therefore no internal wiring
changes are necessary to accommodate
these input voltages.
•
Determine the optimum location for the
camera.
Section 1: Mounting-Camera Housing.
•
All cameras have been tested prior to
shipment.
GUIDELINES
The installation of the
EX72 Camera
is shown in
Sections 1 and 4 listed below.
It is important that these steps are followed in
sequence:
1. Mounting – Camera Housing
2. Voltage Input Connections
3. Camera
Alignment
4. Camera
Adjustments
