13
3. CAMERA ALIGNMENT
The
EX72
camera, as supplied, is aligned so
that the viewed image is shown in an upright
position with the optional mounting bracket
attached to the bottom of the housing.
(See
Figure 1 – 1
on page 9)
The “
TOP
” designation label on the camera
module mounting plate indicates the correct
upright viewing orientation for the camera lens.
If a particular situation requires the camera to be
mounted to a surface other than the designated
mounting plane, then the camera module must
be removed and the camera’s mounting ring
rotated into the new upright viewing position.
The “
TOP
” label must always point UP no matter
to what angle the mounting bracket and camera
housing is positioned.
Refer to
Figures 3 –1, 3 – 2, 3 – 3, 3 – 4,
and
3 - 5
for details.
