3
INITIAL PREPARATIONS
•
The camera voltage regulator board
(VRB) accepts an input voltage of either
12V
dc
or 24V
ac
, and a range in-between,
from a regulated power supply.
•
The VRB automatically switches between
ac
or
dc
inputs, therefore no internal wiring
changes are necessary to accommodate
these input voltages.
•
Determine the optimum location for the
camera.
•
All cameras have been tested prior to
shipment.
GUIDELINES
The installation of the
EX70
and
EX70N
is
explained in Sections 1 to 5 listed below.
It is important that these steps are followed in
sequence:
1. Cover Removal
2. Input Power Connections
3. Mounting - Camera Base
4. Camera / LED Array Adjustments
5. Camera Re-Assembly
Summary of Contents for EX70
Page 22: ...18 Note ...
