16
Step 5.5 - Mount this Chassis into the Base
Housing, ensuring no cables are
pinched or chafed.
Step 5.6 - Thread the Cover onto the Base,
making sure the Lens and its Foam
Ring are correctly positioned.
Thread the ring on tight and then
tighten the set-screw on the cover.
Refer
to
Figure 1-1
on page 5.
Step 5.6 - Seal the ¾” NPT entry with silicone
to prevent moisture or water from
entering.
Summary of Contents for EX70
Page 22: ...18 Note ...
