4
en |
EX7-IP
MAN7IPB Rev.0 | 2008.10
Quick Install
Bosch Security Systems
1.1
Unpacking
Parts list
(items supplied with unit)
- EX7IP Infrared Imager™ Assembly
- Installation Instructions booklet
- Allen Key
- Software CD
Items required for installation
(not supplied with units)
- Mounting hardware
- Mounting tools
- PC/Laptop with RJ45 Ethernet port
- Power supply
1.2
Initial Preparations
1.) Determine the operating voltage at the installation site. The
camera‘s Voltage Regulator Board accepts 12-24VAC / VDC input
without change to internal connections.
2.) Determine the optimum mounting location for the camera.
S
ee
Section 2, Mounting the unit.
3.) All cameras have been tested and pre-focused with telephoto
setting as factory default prior to shipment. If any adjustment
needed, it is advisable to check the camera’s operation before
installation
4.) Install IP Camera Software on PC.
Summary of Contents for EX7-IP
Page 1: ...EX7 IP Ceiling Mounted No Grip IP Camera EX7 IP en Installation Manual ...
Page 2: ......
Page 13: ......
