Bosch EX65, Instruction Manual

Page: 22 / 48

22 en | Mounting EX65 Explosion-protected Camera
F.01U.412.061 | 2.0 | 2011.08 Instruction Manual Bosch Security Systems, Inc.
7 Mounting
7.1 Mounting the EX65
Follow all local codes with respect to the wiring and installation of explosion protected
housings.
The following installation guidelines must be followed:
– Locate the unit such that it cannot be easily interfered with, either intentionally or
accidentally.
– Select mounting hardware and a mounting surface capable of supporting the combined
weight of the equipment under all expected conditions of vibration and temperature.
– Secure all cabling.
The EX65 can be mounted to a compatible Bosch bracket with M6 bolts or any purpose-built
bracket using M6 or 1/4 in.–20 bolts. Ensure that a fabricated bracket is capable of
supporting at least three times the weight of the system. See Figure 7.1 below to match the
mounting cradle holes.
Figure 7.1 Bottom View with Mounting Cradle detail
1. Choose a mounting surface and, if needed, prepare the surface by pre-drilling and
tapping three M6 x 1.0 x 20 mm holes in a line that are 30 mm apart center to center and
in line with the desired surveillance target (see Figure 7.1 ).
2. Allocate three stainless steel M6 x 1.0 x 16 mm bolts with lock washers and ensure that
the mounting surface and the threads of bolts are clean and free of debris.
3. Optionally apply a few drops of a medium strength thread locking agent to the bolts per
the manufacturer’s instructions.
4. Secure the mounting cradle (see Figure 7.1 , item 1) to the mounting surface with the
M6 x 1.0 x 16 mm bolts and lock washers using a 10 mm wrench or the supplied multi-
use tool. Do not tighten fully.
CAUTION!
Ensure the selected location is protected from falling objects, accidental contact with moving
objects, and unintentional interference from personnel. Follow all applicable building codes.
Ø
6.6
0.26
71°
60.0
2.36
3/4-in. NPTX 4