14
en | Initial Preparations
EX14 Marine Camera
F.01U.240.878 | 1.0 | 2011.07
Instruction Manual
Bosch Security Systems, Inc.
3
Initial Preparations
1.
Determine the operating voltage at the installation site.
The camera’s Voltage Regulator Board accepts 12-24 VDC/
VAC input without change to internal connections
2.
Determine the optimum mounting location for the camera.
See
Section 4 Camera Mounting, page 15
.
3.
All cameras have been tested and pre-focused with
telephoto setting as factory default prior to shipment. If
any adjustment needed, it is advisable to check the
camera’s operation before installation.
3.1
Installation Guidelines
–
Refer to
Section 4 Camera Mounting, page 15
, for
installation instructions.
–
It is important that these steps are followed in numerical
order.
–
This installation must be made by a qualified service
person and must conform to all local codes.
