577709 | REV. A | 11.2016
Bosch Automotive Service Solutions
User Manual
|
EMMIT
|
7
|
en
Android Settings
This section explains settings for customizing your scan
tool. This scan tool is an Android device and there are
several settings that can be adjusted. This section will
only cover the settings that could affect the scan tool.
Accessing Android Settings
1. From the home screen, tap the Android Apps button.
2. Touch Settings. Or touch the top right of the screen
and swipe downward to display the Quick Settings
pop-up, and then touch Settings.
The Settings Screen
There are four settings:
•
Wireless and network
•
Device
•
Personal
•
System
Wireless and Network
Control your device’s wireless connections.
Wi-Fi
Use Wi-Fi settings to manage your device’s Wi-Fi connec-
tions. Some networks need the MAC address for securi-
ty purposes. To obtain the MAC address use the link
below.
Android/settings/Wi-Fi (turn Wi-Fi on)/ pull down menu/
advanced.
Mac Address will be displayed at the bottom of the
screen.
Turning Wi-Fi On or Off
When you turn Wi-Fi service on, your device automatical-
ly searches for available, in-range Wireless Access Points
(WAPs).
1. From the home screen, touch the Android Apps
button.
2. Touch Settings.
3. On the Wi-Fi tab, touch the OFF / ON icon to turn the
Wi-Fi on or off.
Scan for Wi-Fi Networks
To make sure you have an accurate list of Wi-Fi net-
works.
1. From the home screen, touch the Android Apps
button.
2. Select Wi-Fi and then touch Scan.
Add Wi-Fi Network
To open a dialog where you can add a Wi-Fi network by
entering its Network SSID (the name it broadcasts),
security type, and other properties:
1. From the home screen, touch the Android Apps
button.
2. Touch Settings.
3. Select Wi-Fi and then touch Add network.
4. Use the keyboard to enter Network SSID.
5. Touch the Security field and then touch a security
type.
Note: Depending on the security protocol used by the WAP, additi-
onal network information, such as a password, may be required. If
necessary, touch password and enter the password.
6. Touch Save.
Device
This section of the Settings screen contains settings for
your device.
Sound/Volume
Set the volume level for all types of sounds.
Note: The scan tool does not have internal speakers. You can only
set volume while using headphones or an external speaker.
1. From the home screen, touch the Android Apps
button.
2. Touch Settings.
3. Touch Sound.
4. Adjust Volume.
5. Drag the slider to set the volume.
Brightness
Set the default screen brightness.
1. From the home screen, touch the Android Apps
button.
2. Touch Settings.
3. Touch Display.
4. Touch Brightness.
5. Drag the slider to set the brightness or touch Auto-
matic brightness.
6. Touch OK to save the setting.
Screen Timeout
Set the length of delay between the last screen touch
and the automatic screen timeout (dim and lock).
1. From the home screen, touch the Android Apps
button.
2. Touch Settings.
3. Touch Display.
4. Touch Screen Timeout and select the screen delay
time. The screen delays shutting off after inactivity
for the selected period of time.
Personal
This section of the Settings screen allows you to manage
the personal settings for your device.
The scan tool does not require any setting in this group.
