manualshive.com logo in svg

Bosch EMMIT, User Manual

Share
Download
Bosch EMMIT User Manual Download Page 6

en

 | 

4

 User Manual | 

EMMIT

577709 | REV. A | 11.2016

Bosch Automotive Service Solutions

General Information

Introduction

The EMMIT is a ruggedized touchscreen tablet equipped with the Android operating system. It is designed to dia-

gnose Infotainment systems using the vehicle‘s diagnostic/communication links.
The EMMIT has several modes of operation which can be found on the home screen. These modes will be explained 

in this manual.

ss02273

1

2

3

4

5

6

7

8

9

10

Figure 1 .  EMMIT Home Screen

1 .  Bluetooth Button

• 

Available tests for the Bluetooth function of the 
radio.

2 .  Back Button

• 

Returns to the previous page. The back button is 
not available on all screens.

3 .  Settings Button

• 

Change settings of the tool.

4 .  Veh . Batt

• 

When connected to the DLC battery voltage will 
be displayed.

5 .  Close Button

• 

Closes the EMMIT Application.

6 .  Vehicle Information

• 

Vehicle Data, VIN, Infotainment System, etc.

7 .  Aux Button

• 

Available tests for the AUX function of the radio.

8 .  USB Button

• 

Available tests for the USB function of the radio.

9 .  Power Button

• 

Power tool ON or OFF

10 . Home Button

• 

Minimizes app and opens Android central home 
screen.

Summary of Contents for EMMIT































Reviews:

No comments

Brands by name

Popular brands

Load more brands