Bosch e103022, Installation Instructions Manual, Page: 16 / 64

Replace junction box cover.
Make sure the cover is seated
behind the front lip of the strain
relief plate. Attach the cover
with the screw (Part E) from the
installation kit.
Warning
............................
..........................................
..........................................
..........................................
..........................................
..........................................
E
17
Level the dishwasher horizontally by turning feet (1) clockwise to
raise or counter-clockwise to lower front of unit. Once level, (2)
insert leg leveler locking screws (Part D) and tighten.
Note: If your countertop is wood, skip to Step 20.
(1)
(2)
D
18
If your countertop is stone, detach
mounting brackets (A) from the
top and position them at either
points on the side. Insert screw (B)
through pre-positioned brackets on
each side of the unit and attach the
brackets.
19
14