Product
Document type
Release #
SAP/Doc number
DVR 600 Series
Release notes
V2.0.6
Security Systems
Release date
2012.10.12
Page 2 of 6
2
Update procedure
To update the DVR 600 Series to the latest firmware, please refer to the Video recorder 600
Series Operation Manual, chapter 6.6.5 or follow instructions below:
1.
Put firmware v2.0.6 via a PC on the root of a USB memory stick (file name: 600series.bin
[date 2012-10-12])
2.
Insert the USB stick into the front USB connector of the DVR
3.
Log on as “ADMINISTRATOR” in the local unit
4.
Select
Menu
and go to the “System > Configuration” screen
5.
Select
Update firmware
to upgrade the DVR software. In this case, the current DVR
settings and video will not be deleted or replaced during the update process.
Figure:
Update firmware menu
6.
Select
OK
to begin the update process or click
Cancel
to stop and exit. After the update
process is completed you have to press
OK
so that the system will automatically restart.
Alternative a firmware upgrade can be performed via the Web Client:
-
Open Internet Explorer and type on the address bar the network IP address of the unit
-
Log on by entering the User ID (default ADMINISTRATOR) and Password (default
000000)
-
Select the configuration mode by clicking on the “Configuration” button
-
Select ‘System’ and then ‘Configuration’
-
Browse to the v2.0.6 firmware file name “600series.bin” (date 2012-10-12)
-
Press the “Update” button
Firmware will be automatically updated and unit will be restarted.
