11
Circulating-air mode
❑
With activated
carbon filter if
exhaust-air mode
is not possible.
Electrical connection
Risk of electric shock!
The appliance features an EU safety plug. To
ensure protective earthing in a Danish
socket, the appliance must be connected to a
suitable plug adapter. This adapter
(permitted up to max. 13 amps) is available
from customer service (spare part no.
616581).
The mains power supply must correspond to
the rating indicated on the plate situated
inside the hood. If provided with a plug
connect the hood to a socket in compliance
with current regulations and positioned in an
accessible area. If it not fitted with a plug
(direct mains connection) or if the plug is not
located in an accessible area apply a bi-
polar switch in accordance with standards
which assures the complete disconnection of
the mains under conditions relating to over-
current category III, in accordance with
installation instructions.
Warning!
Before re-connecting the hood
circuit to the mains supply and checking the
efficient function, always check that the
mains cable is correctly assembled.
Warning!
Power cable replacement must be
undertaken by the authorized service
assistance centre or similar qualified person.
Connect the hood
to a norm complying plug
only. The plug should be located in an
accessible zone.
❑
The plug must be equipped with a
protection circuit.
❑
If after installation the plug can not be
reached, a disconnecting device must be
envisaged.
Circulating-air
mode
60 cm
90 cm
Exhaust-air
mode
10,3
13,2
11,5
14,4
30
396
419
375
MAX. 1171
MIND. 887
598 - (898)
490
(522)
MIND. 95
MAX. 375
490
Prior to installation
The complete installation set can be
obtained
from specialist
outlets.
The corresponding accessory numbers can
be found at the end of these operating
instructions.
Preparing the wall
❑
The wall must be flat and perpendicular.
❑
Ensure that the wall is capable of
providing a firm hold for mounting screws
and plugs.
Weight in kg:
We reserve the right to construction changes
within the context of technical development.