Bosch DKE 985 S, Operating And Installation Instructions

Page: 22 / 172

22
Operating procedure
Switching off
With fan run-on started from manual
mode:
Press the button.
❑
The fan runs at the setting last selected.
❑
The dot on the display flashes.
❑
After 10 minutes the fan switches off and
the displays go out.
With fan run-on started from automatic
mode:
Press the button.
❑
Fan run-on does not start until the
automatic function has switched the fan
back to Setting
| .
❑
The dot on the display flashes.
❑
After 10 minutes the fan switches off and
the displays go out.
Without fan run-on:
Press the
L
button.
Light
❑
The light can be used at any time, even
when the appliance has been switched
off.
Switching on/off:
Press the
a
button.
Special functions
Adjusting the sensitivity of the sensor
control:
1. Press and hold down the automatic
button .
2. To display the current sensitivity, press
the
+
or
–
button.
3. You can now change the sensitivity of
the sensor control by pressing the
+
or
–
button.
❑
Factory setting: @ .
❑
Lowest setting: { .
❑
Highest setting: Ö .
Switching on the light automatically, e.g.
via a timer:
❑
Fan and light must be switched off.
Switching on:
Simultaneously press the a and
L
buttons.
❑
After approx. 3 seconds the light
switches on to acknowledge the setting.
Switching off:
Repeat the process with the light switched
on.
❑
After approx. 3 seconds the light
switches off to acknowledge the setting.