5
Intensive setting:
Maximum power is obtained at the
intensive setting. It is only required for short
intervals.
❑
Keep pressing the
+
button until a
ç
appears in the display.
❑
If the intensive setting is not cancelled by
hand, the fan will automatically switch
back to step
}
after 10 minutes.
Fan follow-on:
❑
Press the
button.
The fan continues to run at step
|
for 10
minutes, and at the same time a dot
flashes in the display. After this period
the fan switches off automatically.
Lighting:
❑
The light can be switched on at any
time, even though the fan is switched off.
❑
Adjusting the brightness:
Hold down the
a
button until the
desired brightness is obtained.
Switching on the light automatically, e.g.
via a timer:
❑
Fan and light must be switched off.
Switching on:
Simultaneously
press the
–
and
!
buttons.
❑
After approx. 3 seconds the light
switches on to acknowledge the setting.
Switching off:
Repeat the process with the light switched
on.
❑
After approx. 3 seconds the light
switches off to acknowledge the setting.
Light
Fan OFF
Reduce fan speed
Fan ON and
increase
speed
Display for
fan setting
Fan follow-
on
Operating procedure
Acoustic signal:
❑
When a button is pressed, this is verified
by an acoustic signal.
Switching off the acoustic signal:
❑
Simultaneously press buttons
0
and
+
until a signal is emitted after approx. 3
seconds.
Switching on the acoustic signal:
❑
Repeat the process.
Switching the fan ON
❑
Press the
+ button.
Setting the required fan speed:
❑
Press the
+ button.
The fan speed is increased by one step.
❑
Press the
– button.
The fan speed is reduced by one step.
Switching the fan OFF:
❑
Press the
0
button.
The displayed
{
goes out shortly
afterwards.
Or:
❑
Keep pressing the
–
button until the fan
switches off.
The displayed
{
goes out shortly
afterwards.
The most effective method of removing
vapours produced during cooking is to:
❑
Switch the ventilator ON
as soon as you begin cooking.
❑
Switch the ventilator OFF
a few minutes after you have finished
cooking.
