Rear view:
1
2x mains connection 100 – 240 VAC,
50 - 60 Hz
Note: Connect both power cables.
5
Monitor (VGA)
Note: Do not use!
2
2x PS/2 (mouse and keyboard)
6
2x NIC
Note: Connect both NIC ports to the
appropriate network switch.
3
2x USB 2.0
7
1x graphic card (1x Display Port,
1x DVI)
Note: DVI port must be used for
configuration.
4
Serial interface COM
Control panel buttons
There are two push-buttons located on the front of the chassis. These are (in order from left
to right) a reset button and a power on/off button.
–
Reset: The reset button is used to reboot the system.
–
Power: The main power switch is used to apply or remove power from the power
supply to the server system. Turning off system power with this button removes the main
power but keeps standby power supplied to the system. Therefore, you must unplug
system before servicing.
Control panel LEDs
The control panel located on the front of the chassis has LEDs to provide you with critical
information related to different parts of the system. This section explains what each LED
indicates.
–
Information LED: not used
–
NiC2: A flashing LED indicates network activity on GLAN2.
–
NIC1: A flashing LED indicates network activity on GLAN1.
2.3.1
2.3.2
DIVAR IP 7000 1U
System overview | en
11
Bosch Sicherheitssysteme GmbH
Installation Manual
2014.12 | V3 | DOC
Summary of Contents for DIVAR IP 7000 1U
Page 1: ...DIVAR IP 7000 1U DIP 7040 00N DIP 7042 2HD DIP 7042 4HD en Installation Manual ...
Page 2: ......
Page 40: ......
Page 41: ......
