Bosch DIP-7180-00N Installation Manual Download

Page: 47 / 52

DIVAR IP 7000 (2U)

Maintenance | en

Bosch Sicherheitssysteme GmbH

Installation Manual

2016.07 | V2 | DOC

See also

–

Power supply, page 14

10.12.1

Replacing the power supply

The power supply can be replaced without turning off the system if a redundant power supply
is available.
Replacement units can be ordered directly from Bosch RMA desk.

To replace the power supply:

You can leave the unit running and remove only one power supply if your chassis includes
a redundant power supply.

Unplug the AC power cord of the failed power supply.

Push the release tab (on the back of the power supply) as illustrated.

Pull the power supply out using the handle provided.

Replace the failed power module with the same model.

Push the new power supply module into the power bay until you hear a click.

Plug the AC power cord back into the module and turn on the unit.

10.12.2

Replacing the power distributor

Redundant chassis that are 2U or greater require a power distributor. The power distributor
provides failover and power supply redundancy.

Summary of Contents for DIP-7180-00N





















































Search results

Summary of Contents for DIP-7180-00N

Reviews:

Related manuals for DIP-7180-00N

Brands by name

Popular brands

Bosch DIP-7180-00N, Installation Manual

Search results

Summary of Contents for DIP-7180-00N

Reviews:

Related manuals for DIP-7180-00N

Brands by name

Popular brands